| |||||||||||
| |||||||||||
|
| |||||||||||
As always, we carry much more than can be shown here.
Call with your needs to determine if the items you want can be
special ordered
.
|
Click on item for more information ... DB-100™ Diamond Band Saw SwapTop™ 6-1/2" Diamond Trim Saw SwapTop™ Trim Saw Conversion Kit SwapTop™ Edger/Shaper Conversion Kit | |||||||
|
| |||||||
|
HOT HEAD® BEAD TORCH HEAD Most lamp-workers use an expensive oxygen-propane torch system costing several hundreds of dollars requiring an oxygen tank in your home. Non-oxygen Hot Head® Torch works with high intensity MAPP-GAS to produce beautiful beads without the muddy colors caused by regular torch heads. Specially designed to produce plenty of heat and a clean and neutral oxygen-rich flame with only room air. When used properly this torch head will not reduce the colors of any glass. Inexpensive, easy to set up and operate with just a simple one pound canister of MAPP-GAS.
#4100
SELF-IGNITING TORCH HEAD WITH REGULATOR
Bent nozzle rotates 360° to enable work in any position without moving the
fuel cylinder. The regulator allows for constant flame and pressure, which
is important when making beads. The venturi combustion tip generates
brazing temperatures without oxygen. Just press the piezo ignitor button
for instant flame. Works with MAPP-GAS or propylene brazing fuel.
#4102
PROPYLENE BRAZING FUEL CYLINDER
Propylene is a high temperature fuel that burns hotter and cleaner than
other fuels. It is identical in temperature and performance to MAPP-GAS.
#4103
- 14.1oz
MAPP-GAS -
Can be purchased at your local hardware or building supply stores.
GAS CANNOT BE SHIPPED UPS/FEDEX
CYLINDER STAND
Plastic stand holds 14.1oz. oz 16.4oz cylinders upright securely so you
can concentrate on your work and not worry about knocking over your torch.
#4104
DIDYMIUM SAFETY GLASSES
Special lens material blocks transmission of the bright yellow light, "soda flare" while transmitting the rest of the visible spectrum, making it easier to see your bead clearly while in the flame. Universal Fit.
#4110
FIBER BLANKET SHEET Place your hot beads in between this non--asbestos refractory material and cooling will be slowed down at an acceptable rate. (Large beads may require kiln annealing). Sheet size:20" x 24"
#4124 - 1" thick
STAINLESS STEEL MANDRELS Stainless steel rods are excellent for bead making when coated with separator.
#4115 - 1/16"x 8" (10/pk)
1/16" Good for wire work
#4116 - 1/8"x 8" (10/pk)
1/8" Good for leather work
BEAD SEPARATOR (HI-FIRE - HOTLINE) Mandrels need to be treated to keep beads from sticking or breaking. Sold as a dry powder, mix it up approximately two parts kiln wash to one part water and stir thoroughly to a consistency of yogurt. Can also be used as a shelf primer.
#4120 - 24oz.
BEAD MANDREL REST Stainless steel V-shaped platform to rest hot glass, mandrels and tools making them easy to access while working.
#4117 - 71/2" x 2" x 1"
CARBON PADDLE Ideal for bead-making
#4125 - 2" x 3" x 3/8"
GROOVED MARVER A combination marver and pattern impresser. One side is smooth finish, the other side has 12 vertical parallel fins with rounded tops. Rolling the hop gather of glass over the fins produces a linear pattern, a grid pattern or a diamond (pineapple) pattern. Made of solid aluminum, this is a versatile tool for the beadmaker.
#4129 - 1-7/8" x 4" x 5/8"
BEAD MAKING STARTER KIT
#4416
BEAD CORE SCRAPER SET Simplifies cleaning bead cores after removing from the mandrel wire or rod. Set contains 2 each of 1.2mm, 1.6mm and 2.0mm scrapers.Use 2 at a time for larger diameter cores. Rod has the appearance of "barbed wire".
#4122
M0RETTI ROD ASSORTMENT SET
Each set contains one 13-5/8" long rod of each color in that set. If
one color is out of stock in the set, another rod in the set will be added
to complete the count total.
MILLEFIORI SLICES "A Thousand Flowers" C.O.E. 104 x 10 -7° C. Assorted colors and styles only. Slices are approximately 3/16" to 1/4" thick. Three sizes available in opaque and two sizes in transparent colors. Variation in size may occur due to manufacturing process. Not compatible with Bullseye and Uroboros glass. Sold in 1oz. packages.
|
$70.50
|
Minimum order $20.00 (NOT including shipping & handling). $100 minimum on all orders to be shipped outside the continental USA
You may order by check, money order or credit card via the US mail, Email
or by phone. Orders outside the U.S. must be paid by credit
card ( MC / VISA / Discover accepted). Prices may change without notice.
| |||||||||
| |||||||||
|
| |||||||||
| Visitors: |
|