Caldron Crafts 6611 Route 40 West Catonsville, MD 21228 Phone: (410) 744-2155 Fax: (410) 744-7664 EMail: caldron@bcpl.net Web: www.CaldronCrafts.com

Store Hours (EST) Tuesday through Sunday 11:00 am  to 6:00 pm Monday  Closed

As always, we carry much more than can be shown here.
Call with your needs to determine if the items you want can be special ordered .

LIGHT YOUR  CREATIVE FIRE at CALDRON CRAFTS

ATTENTION!  THE NEW 2008 SCHEDULE HAS BEEN MAILED and   POSTED TO THE WEBSITE (below)..  PLEASE EMAIL IF YOU WANT A COPY EMAILED BACK TO YOU OR YOU WANT TO BE ADDED TO OUR EMAIL LIST.

About our Teachers (Learn more ...)

We have assembled a group of teachers with solid backgrounds who can offer Caldron Crafts students a very wide variety of skills and techniques.  We know that with a wider repertoire of skills students can be more creative in developing their own personal style.  We are very proud and pleased that the following instructors will be offering classes this session at Caldron Crafts:

Cindy Blackburn
Sandra Britcher
Alicia Buckler-White
Doug Goldberg
Dana Hinds
Inara Knight
Murf Moorefield
Barbara Warnock

Back To Top

Auspicious Necklace
Taught by Murf Moorefield

Create a necklace whose properties will enhance your purpose (health, prosperity, protection, focus, etc.) We will work individually with each of you to select the most auspicious stones to include in the necklace, how to design it, and how to create it in a ritual manner to infuse it with energy to your purpose.

Thurs May 15        (11am - 5pm)     $95, $85 if rec'd by 5/1              

Back To Top

Beginning Lapidary
Taught by BJ Warnock

Learn to use lapidary equipment to hand cut and polish cabochons, the commonly used cut for opaque gemstones in jewelry making. Students will learn to cut cabs to exact size.

Sat May 17     (11am – 5pm)   LIMIT 4 PEOPLE (REGISTER EARLY!)  $95, $85 if rec'd by 5/10                                                                                                                              

Back To Top

Chain Weaving Samplers (Seed Beads)
Taught by Guest Teacher Dana Hinds

Using size 11 seed beads we will create a small bracelet size sample for each of 3 different Chain Weaving designs.  Each of these designs can be used to make bracelets, necklaces or anklets.  Once you have learned these basics, you will find many other variations for each of these designs.  The 1st stitch we will cover is the Pointed Zig-Zag.  Changing the bead sizes, textures or colors can alter the finished look of this stitch significantly.  The techniques learned in this stitch can be applied for more elaborate double zig-zag and wide-web designs.  The second design we will cover is a lacy tube.  This open weave tube can be easily embellished with pearls or crystal beads and can be used alone or with a pendant.  Our third project will involve a spider weave.  This is a deceptively easy stitch, which can be used to create beautiful lace patterns.  Completer kits will be available if you wish to expand your bracelet size sampler to full necklace length.  Additional full necklace kits will also be available.  The costs for these kits will range from $6 to $20.

Sun May 18     (10am - 5pm)     $95, $85 if rec’d by5/11              

Back To Top

How to Buy and Set Faceted Stones
Taught by BJ Warnock

Learn to create jewelry with faceted stones using pre made settings (which can be soldered or wire wrapped into your own unique design).  We will acquaint you with information on selecting stones to set; using a loupe, examining for flaws, using a gauge, determining the cut of the stone, as well as hands on instruction in setting the stone including using several kinds of stone setting pliers. Three projects will be completed in sterling silver.  No previous experience is necessary.  This workshop is a prerequisite for the advanced classes in faceted stones. 

Sat May 31     (11am – 5pm)     $110, $100 if rec’d by 5/17                                          

Back To Top

Beginning Wire Wrapping
Taught by Master Wire wrapper Murf Moorefield

Create solderless jewelry using wire to set gemstones.  Learn about the different shapes, gauges and hardness of wire, as well as when to use them.  Make twisted wire.  We will make a pair of earrings and two pendants. Sterling Silver Wire used for both pendants.

Sun June 1     (11am – 5pm)      $110, $100 if rec'd by 5/18         

Back To Top

Soldering & Silverworking
Taught by BJ Warnock

This is a two day beginning level course in silversmithing which will teach you the use of the torch and solder and the basic techniques for working with the properties of silver on the first day. We will complete two pendants and a ring on Saturday. On Sunday we will use our soldering skills to create settings for cabochons and learn how to set these stones. Students will use both premade bezel cups and step bezel and learn the advantages and disadvantages of each.

This class is required for all advanced Silversmithing classes.

Sat Jun 7 & Sun Jun 8     (10am - 5pm)     $220, $210 if rec’d by 5/24         

Back To Top

Advanced Wire Wrappers’ Seminar - Exploring Variations
Taught by Murf Moorefield

Students who have taken Murf’s advanced wire wrap classes will be familiar with her seminar technique with which she presents several options for approaching a project.   This time we will make a “Victorian Pin” from Creative Designs in Wire Jewelry.  Students will explore how changing which wires we use, different tools or changing a technique will result in a unique piece. If time allow, students will choose another project for the group to explore.

Sat June 14     (11am - 5pm)     $120, $110 if recd by 6/1         

Back To Top

Hammered Celtic Necklace
Taught by Murf Moorefield

Create a textured handmade necklace in the ancient Celtic tradition from Sterling Silver and beads.  Students will learn how to create a design of their own, or use the teacher’s sample design and use hammer and anvil to execute the textures.

Sat June 15     (11am-5pm)     $115, $105 if rec'd by 6/1    

Back To Top

Handcrafted Treasure Boxes
Taught by Murf Moorefield

Create a decorative copper box with a hinged lid to hold and protect your treasures.  You will learn how to make the box from sheet copper and how to use a variety of tools including hammers, punches, dapping tools, flexshaft, chisels, etc. to put designs on the lid.

Sat June 21     (11am - 5pm)     $90, $80 if rec'd by 6/7    

Back To Top

Knot Those Beads!
Taught by Murf Moorefield

Learn the basics of bead stringing: how to knot, when to use the various types of stringing materials, how to begin and end projects, how to tell if a stone is dyed or natural.  Make 2 bracelets and 1 necklace.

Sat June 22     (11am – 5pm)      $95, $85 if rec'd by 6/8                                           

Back To Top

Sun June 28     (11am – 5pm)       $110, $100 if rec'd by 6/14                                     

Back To Top

Flameless Sterling Celtic Cross Pendant
Taught by BJ Warnock

Students will learn to use a jewelers’ saw and other hand tools to create this Celtic Cross Pendant with prong cabochon setting from heavy Sterling sheet. They will be taught how to apply the spiral design (or one of their choosing) using an easy chasing technique. And finally they will learn how to set a stone in this type of hand made setting. All of this without the use of flame or solder. This is a totally cold technique.

Sun June 29     (11am - 5pm)     $115, $105 if rec’d before 6/15    

Back To Top

Chainmaille -- The Queen's Maille
Taught by Guest Teacher Sandra Britcher

More than just another chainmaille pattern! The queen's maille lends itself to small rings for a dainty, but sturdy chain.  You will gain valuable experience working with small 22g sterling silver rings. Adapt this knowledge to other patterns taught previously. Previous chainmaille class a must.  Optivisors will be very helpful!

Sat July 12    (11am – 5pm)      Sterling $130, $125 if rec’d by 6/28            copper $100, $90 if rec’d by 6/28   

Back To Top

Cold Forging The Bracelet
Taught by Guest Teacher Cindy Blackburn

Techniques will be taught using a hammer to change the surface of copper and silver wire to create hand made distinctive jewelry.  This is Cindy’s beginning level Forging Class, a prerequisite for her advanced classes.  Students will make Copper practice pieces and a Sterling Silver Bracelet.  No soldering necessary. 

Sun July 13     (11am - 5pm)     $130, $120...                        

Back To Top

Soldered Jumpring Bracelet
Taught by Murf Moorefield

This class is great for both the beginning and advanced student.  Beginners will learn basics of silver soldering and working with a torch, while advanced students can perfect their skills.  All students will be given the opportunity to design and complete a great soldered chain! 

Sat July 19     (11am – 5pm)      $110, $100 if rec’d by 7/5         

Back To Top

Silverworking III
Taught by BJ Warnock

Advanced techniques in silver working, including building a bezel and backing plate to fit a specific cabochon.  This technique allows the silversmith to bezel set stones, fused glass or other materials of any size or shape.  Must know soldering and basic techniques as well as how to set cabs in bezels.   Taught by Barbara Warnock.  Sun July 20 11am-5pm $120, $110 if received by 7/6

Sun July 20     (11am – 5pm)      $120, $110 if rec'd by 7/6           

Back To Top

Stone On Stone -- An Advanced Metalworking Class
Taught by Guest Teacher Cindy Blackburn

The class will create a pendant using the technique of setting a stone through a hole drilled in another cabochon.  We will be bezel setting a flat pearl, drilling it then riveting a bezel set 4mm cabochon through the pearl.

Cindy’s Forging class is recommended and students must have taken Silverworking III.

Sat July 26     (11am – 5pm)      $145, $135 if rec’d by 7/12         

Back To Top

Filigree
Taught by Murf Moorefield

Learn to fabricate special filigree wire, and solder it into lacey, open designs. We will set a stone in this class.

Must know soldering.

Sun July 27     (10am - 5pm)     $105, $95 if recd by 7/13                                                 

Back To Top

Micro-Macro Pendant (Fiber & Bead Jewelry)
With guest teacher Doug Goldberg

Fiber Art & Jewelry making come together as you learn the fascinating skill of Micro-Macrame. This is NOT a 70’s repeat, but a fresh modern design. You will create a simple & elegant pendant, learn about the appropriate cords to use and how to integrate beads into your design. The professional finish of this tiny jewelry art piece is Doug’s specialty. Bring your own magnification, as we will be working small.

As with all classes with guest teachers we cannot speak for when or if they will be repeated so if you want it, take it NOW.

Sun  Aug 3     (11am – 5pm)      $90, $80 if rec'd by 7/20         

Back To Top

Textured Jewelry
Taught by BJ Warnock

Learn how to use your flex shaft, hammers, punches and other tools to create intriguing backgrounds for your jewelry pieces.  We will work in Copper, Brass and Sterling.  Students should finish one textured sterling pendant and some smaller pieces in class.

Sat Aug 9     (11am - 5pm)     $110, $100 if recd by 7/26                                                 

Back To Top

Stone Identification
Taught by BJ Warnock

In this class we will learn how to use streak and hardness tests as well as other means of identification.  We will determine what stones we have and whether or not they are what they have been represented to be.  We will see ways to tell look alike stones apart.

Sun Aug 10     (11am – 5pm)      $80, $70 if rec'd by 7/27           

Back To Top

Tricks of the Trade for the Professional Beader
Taught by Murf Moorefield

We will cover the techniques of making an endless necklace, multi strand necklace or earring, and a woven bracelet using gemstone beads.  We will also solve beading problems you are having, discuss elements of design, how to make a thread needle and more.  Must have taken Knot Those Beads.

Sat Aug 16     (11am - 5pm)     $100, $90 if recd by 8/2                                                 

Back To Top

Beginning Jewelry Making
Taught by BJ Warnock

Make a variety of simple jewelry pieces including earrings, pendants and necklaces using wire, chain, beads, headpins, eyepins and more.  This class is designed to introduce the beginner to the use of jewelry making hand tools  and the vast array of materials available to make quick and easy,  beautiful jewelry.

Sun Aug 17     (11am – 5pm)      $110, $100 if rec'd by 8/3           

Back To Top

Bead Cabochon Pin (Seed Beads)
Taught by Guest Teacher Dana Hinds

In this class, you will learn how to create a bezel for a cabochon using seed beads.  You will learn how to select a cabochon for a seed bead bezel, as well as get some ideas for other things that lend themselves to this technique.  We will work with a variety of seed bead sizes ranging from 10 14 and will cover several edging techniques.  We will complete this project with a pin back but this same technique can be used for necklaces, bracelets and pouches.  You will learn the secret to creating a secure long lasting beautiful piece.

Sun Aug 24     (11am – 5pm)      $95, $85 if rec'd by 8/10           

Back To Top

Split Shank Ring With Faceted Stone
Taught by BJ Warnock

 In this class we will learn how to make and size a split shank sterling silver ring and how to solder a setting for the faceted stone.  Students will have a choice of stones to set including garnet, amethyst, citrine and several lab created stones.  This is a timeless design with a simplicity that does not detract from the stone.

Sat Sept 6     (11am – 5pm)      $120, $110 if rec'd by 8/24           

Back To Top

   
See Us At These Shows ...
STORE OPEN ALL SHOW DAYS