| |||||||||||
| |||||||||||
|
| |||||||||||
As always, we carry much more than can be shown here.
Call with your needs to determine if the items you want can be
special ordered
.
DB-100™ Diamond Band Saw
The Inland DB-100 Diamond Band Saw is the perfect saw for intarsia, free form, and even cabbing preforms. Saws hundreds of minerals, from Acanthite to Zircon. Increase your yields on valuable rough with accurate preforms cut right out of the middle of a piece! Improve your faceting results by cutting along the veils for cleaner finished gems.Key Features:
- Comes with one diamond blade for sawing agates, opals, glass, stone, and most other hard materials.
- The optional WoodCut™ and MetalCut™ blades saw wood, plastics, fiberglass, leather, non-ferrous metals, printed circuit boards and more.
- Replaceable BladeSert™ blade guides make the most intricate cuts simple. The upper blade/drip guide is adjustable for varying material thickness.
- The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade when wet sawing. Uses water for coolant to avoid messy oil clean-up.
- The spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup, and perfect tracking hour after hour, and enhances blade life.
- The work surface is made of machined aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
- The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic.
- All frame and interior support walls are extra thick for maximum strength and durability.
- The rigid housing absorbs and deadens sawing and motor sounds for quiet operation. The plastic construction makes it extremely light weight and easy to handle, so you can take it with you on the road!
Price: $259.95
SwapTop™ All-In-Wonder™ Complete Lapidary Workshop
The SwapTop™ All-In-Wonder™ is the most affordable complete cabbing system on the market. Because of its unique low profile design, the SwapTop can be taken anywhere, but it will still pass muster on the workbench at home.
The All-In-Wonder can be set up as a 6" Flat Lap, a 6 1/2" Trim Saw, and/or a 1" Drum Grinder / Shaper. Each of the three machines can be set up in just minutes.
Water cooled system means no messy oil to clean up. Faster RPM motor allows you to quickly finish the finest cabs possible. This machine includes (almost*) everything you need to start making cabochons today.
* Rocks sold separately.
Key Features
- Quiet and Powerful: Our direct drive Permanent Magnet DC motor is stronger than other machines you will find for two or three times the price. Comes complete with speed controller.
- Quick and Easy: No hassle product assembly, operation is easy and straight forward, and changeover takes only minutes.
- As a Flat Lap Machine: Quickly and easily converts to a SwapTop™ Flat Lap Machine with the conversion kit provided.
Includes ...
(4) 6" diamond disks plus a polishing pad.
(1) 170 Grit 6" Flat Lap
(1) 325 Grit 6" Flat Lap
(1) 600 Grit 6" Flat Lap
(1) 1200 Grit 6" Flat Lap
- As a Trim Saw: Quickly and easily converts to a SwapTop™ Trim Saw with the conversion kit provided.
Includes (1) 6 ½" x .020" diamond blade.
- As an Edger/Shaper: Quickly and easily converts to a SwapTop™ Edger/Shaper with the optional conversion kit.
Includes (1) 1" 60 grit diamond drum.ALL IN WONDER 6 inch Price: $429.95
ALL IN WONDER 8 inch Price:$519.95
FLAT LAP ONLY 6 inch $309.95 FLAT LAP ONLY 8 inch $399.95
436002 Arbor & nut $14.95
436001 6" plastic master lap $13.95
438001 8inch plastic master lap $19.95
436005 6" felt polishing pads (3 pack) $15.95
438005 8 inch felt polishing pads (3 pack) $19.95
450014 Diamond compound 14,000 grit $14.95
50037 cerium oxide polishing powder $8.95
436060 6" 60 grit diamond flat lap $74.95
436100 6" 100 grit diamond flat lap $74.95
436170 6" 170 grit diamond flat lap $59.95
436275 6" 275 grit diamond flat lap $59.95
436325 6" 325 grit diamond flat lap $59.95
436600 6" 600 grit diamond flat lap $49.95
436120 6" 1200 grit diamond flat lap $49.95
436300 6" 3000 grit diamond flat lap $49.95
436060 6" 60 grit d
SwapTop™
6-1/2" Diamond Trim Saw
The SwapTop™ Trim Saw is an all purpose, full feature trim saw for all your lapidary projects. Save time and money by cutting more detailed, pre-formed cabs. Water cooled system means no messy oil to clean up. Faster RPM motor allows you to use the thinnest of blades for your most valuable rough like opals.Key Features
- Sturdy and Accurate: The aluminum surface is sturdier, longer lasting, and won't corrode when used wet. The fence helps ensure more accurate cuts.
- Large Work Surface: The 10" x 12" work surface provides plenty of work space for larger projects but takes up just a small portion of your work bench.
- Convenient Size: Quiet but powerful DC motor allows the 6 1/2" blades to provide a full 1 1/8" depth of cut, more than enough for trimming up pre-slabbed material!
- Quick and Easy: No hassle product assembly, operation is easy and straight forward, and blade changes take only minutes.
- Use Wet or Dry: Use the optional WoodCut™ 6½" blade or 6½" General Purpose Blade for dry sawing a variety of other materials.
- Converts to Edger/Shaper: Quickly and easily converts to a SwapTop™ Edger/Shaper with the optional conversion kit.
Price: $169.95
Key Features
- Quick and Easy: No hassle assembly takes only minutes. The cleverly designed motor unit allows it to operate with the shaft vertical or horizontal.
- Multiple Use: Turns a single machine into several machines at a fraction of the cost without tying up your work space.
- Use Wet or Dry: Work wet with diamond drums to shape stone, marble, tile, and other mineral based materials. Use it dry to shape wood, plastics, wood composites and similar materials.
Price: $29.95
SwapTop™ Edger / Shaper / Grinder The SwapTop™ Edger / Shaper is a full-size, full feature machine for all your stone grinding, shaping, and drilling needs. It's able to professionally handle large scale projects but precise enough for fine detail work. Use the SwapTop™ Edger / Shaper to grind, shape, edge finish, and drill stone, marble, tile, ceramic, glass, mirror, and similar materials.
Key Features:
- Sturdy and Accurate: The 10" x 12" work surface provides plenty of work space for larger projects but takes up just a small portion of your work bench.
- Quick and Easy: No hassle product assembly, operation is easy and straight forward, and blade changes take only minutes.
- Use Wet or Dry: The SwapTop™ Edger / Shaper works wet with diamond drums to shape stone, tile, ceramic, and other mineral based materials. Use it dry to shape wood, plastics, wood composites and similar materials.
- Converts to a Trim Saw: Quickly and easily converts to the SwapTop™ Trim Saw with the optional conversion kit.
Price: $114.95
JEWELRY BITS FOR CUTTING A GROOVE IN A STONE FOR WIRE WRAPPING:
40190 Jewelry Bit 1.0mm $24.95
40194 Jewelry Bit 1.4mm $24.95
SwapTop™ Trim Saw Conversion Kit
The SwapTop™ Trim Saw Conversion Kit turns your SwapTop™ Edger / Shaper into an accurate and powerful trim saw for all your lapidary and hobby projects. Have more tools, work better in the same amount of space without the cost of buying an entire new machine!Key Features
- Quick and Easy: No hassle assembly takes only minutes. The cleverly designed motor unit allows it to operate with the shaft vertical or horizontal to run two machines.
- Multiple Use: Turns a single machine into several machines at a fraction of the cost without tying up your work space.
- Use Wet or Dry: Work wet with the DiamondCut™ blade (included) to saw stone, marble, tile, and other mineral based materials. Use it with the optional WoodCut™ blade to saw wood, wood composites and similar materials.
Price: $86.95
Genie Gem-Maker Makes short work of grinding and polishing gemstones. Comes complete with 1/4 HP 1800 RPM motor, requiring 400 watts at 115 volts A/C. Wheels include two 6" by 1-1/2" Galaxy diamond grinding wheels (80 and 220 grit), four 6" by 1-1/2" Nova sanding and polishing wheels (280, 600, 1200 and 1400 grit), 18" lamp, 15" magnifier cab rest, 5-1/2" canvas polishing pad, two grams 50,000 diamond compound, sample bottle Water Aid, 4 splash guards, and manual. Also includes SAFETY GLASSES, which MUST BE WORN WHEN OPERATING THIS MACHINE.
115 volt $2045.00
230 volt $2115.00
Trim Saw Attachment for the Genie Gem-Maker
Turn your Genie into a handy 8" trim saw in a matter of minutes. Easy installation. Uses no oil. Requires no tools.
Trim Saw Attachment $345.00 Blade only for Genie Gem Maker $73.75 Glass Blade for Genie Gem Maker $105.00 Water Aid 8 oz $4.50 Water Aid 16 oz $8.25
Pixie - the complete, portable Gem-Maker The Pixie has the same six-wheel sequence of diamond grinding & polishing wheels as the Genie Gem-Maker. Includes one-piece housing on a 14-1/2" x 18" Formica baseboard, 1/8 HP motor, Spra-Mist coolant system, one 80 grit and one 220 grit 4" x 1-1/4" Galaxy metal-bond diamond grinding wheel, one set of four 4" x 1-1/4" Nova resin-bond diamond sanding and polishing wheels (one each 280, 600, 1200, and 14,000 grit), one 15" flex stem lamp, one 4" treated canvas polishing pad, 2 grams 50,000 grit diamond compound, handy cab rest, base for geyser, sample bottle of Water Aid, set of two splash guards, and manual. Also includes SAFETY GLASSES, which MUST BE WORN WHEN OPERATING THIS MACHINE.
115 volt $1395.00
230 volt $1495.00
Model TC-6 The Model TC-6 6" trim saw has an 8" x 10" flat table for cutting large slabs. Table swings up for easy cleaning. Has removable shield. Cast aluminum construction with impact resistant finish. Stainless steel 5/8" arbor with two sealed bearings and extra neoprene seal on tank side.
TC-6-3000 Trim Saw
Includes basic 6" saw, 1/3 HP 1900 RPM 110V/60Hz motor, 6" sintered continuous rim blade, splash guard. Mounted on base board. Vise not included. $515.00Export Model TC-6-3000X Trim Saw
$665.00TC-6-1000 Basic Saw
Includes basic 6" saw with removable splash guard. Blade, motor and vise not included. $240.00Slabbing Vise
$65.00
Silicon Carbide Discs & Belts
High quality silicon carbide discs and belts for sanding and polishing both stone and glass. Use either wet or dry and in both directions. Discs fit plates with 6" and 8" diameters. Belts fit the 6" and 8" expanding drum sizes listed below. Both discs and belts come in the most common grit sizes including the 3" x 41-1/2" belt for a wet belt sander.
Description Item No. Mesh Price
6" Disc Silicon
Carbide
Ship Wt: 6 oz each
702-85-5006-100 100 grit $2 702-85-5006-220 220 grit $2 702-85-5006-320 320 grit $2 702-85-5006-400 400 grit $2 702-85-5006-600 600 grit $2
8" Disc Ship Wt: 6 oz each
702-85-5008-080 80 grit $3 702-85-5008-100 100 grit $3 702-85-5008-220 220 grit $3 702-85-5008-320 320 grit $3 702-85-5008-400 400 grit $3 702-85-5008-600 600 grit $3
Belt Fits:
6" x 2-1/2" Drum2-1/2" x 18-15/16" Belt
Ship Wt: 6 oz each702-85-6625-080 80 grit $3 702-85-6625-100 100 grit $3 702-85-6625-220 220 grit $3 702-85-6625-320 320 grit $3 702-85-6625-400 400 grit $3 702-85-6625-600 600 grit $3
Belt Fits:
8" x 3" Drum3" x 25-7/32" Belt
Ship Wt: 1 lb each702-85-6830-080 80 grit $4 702-85-6830-100 100 grit $4 702-85-6830-220 220 grit $4 702-85-6830-320 320 grit $4 702-85-6830-400 400 grit $4 702-85-6830-600 600 grit $4
Fits:
Wet Belt Sander3" x 41-1/2" Belt
Ship Wt: 1 lb each
702-85-6341-080 80 grit $6.50 702-85-6341-100 100 grit $6 702-85-6341-120 120 grit $6 702-85-6341-220 220 grit $6 702-85-6341-320 320 grit $6 702-85-6341-400 400 grit $6 702-85-6341-600 600 grit $6
Diamond Polishing Compounds
Quality diamond compound for your gemstone sanding and polishing needs. This compound exceeds U.S. standards specifications for purity, size and uniformity. The diamonds have been scientifically graded for size and shape, and come in a specially compounded medium for easy, economical application. Each mesh size is color coded for quick identification. Packaged in convenient, disposable plastic syringes in three different quantity sizes.
One (1) gram Syringe Two (2) gram Syringe Five (5) gram Syringe
100,000 grit
(1/4 Micron)340-C100-1
$3.00
340-C100-2
$4.50
340-C100-5
$9.00
50,000 grit
(1/2 Micron)340-C500-1
$3.00
340-C500-2
$4.50
340-C500-5
$9.00
14,000 grit
(1 Micron)340-C140-1
$3.00
340-C140-2
$4.50
340-C140-5
$9.00
8,000 grit
(3 Micron)340-C800-1
$5.00
340-C800-2
$8.00
340-C800-5
$17.50
3,000 grit
(6 Micron)340-C300-1
$6.00
340-C300-2
$11.00
340-C300-5
$22.00
1,200 grit
(15 Micron)340-C120-1
$6.00
340-C120-2
$11.00
340-C120-5
$22.00
600 grit
(30 Micron)340-C600-1
$6.00
340-C600-2
$11.00
340-C600-5
$22.00
325 grit
(60 Micron)340-C325-1
$6.00
340-C325-2
$11.00
340-C325-5
$22.00
260 grit 340-C260-1
$6.00
340-C260-2
$11.00
340-C260-5
$22.00
180 grit 340-C180-1
$7.00
340-C180-2
$13.00
340-C180-5
$25.00
100 grit 340-C000-1
$7.00
340-C000-2
$13.00
340-C000-5
$25.00
Minimum order $20.00 (NOT including shipping & handling). $100 minimum on all orders to be shipped outside the continental USA
You may order by check, money order or credit card via the US mail, Email or by phone. Orders outside the U.S. must be paid by credit card ( MC / VISA / Discover accepted). Prices may change without notice.
As always, we carry much more than can be shown here. Call with your needs to determine if the items you want can be special ordered , or mail us your questions or requests. And please, mention this web site; we need on-line encouragement!
Caldron Crafts
6611 Route 40 West
Catonsville, MD 21228
Phone: (410) 744-2155
Fax: (410) 744-7664
EMail: info@caldroncrafts.com
Web: www.CaldronCrafts.com
Visitors:
